HVAC maintenance templates

12 Free HVAC Maintenance Proposal Templates

These are 12 free HVAC maintenance proposal templates, each built around a real kind of contract: office split systems, retail rooftop units, restaurant kitchens, hotels, schools, clinics, warehouses, multi-site portfolios, commercial boilers, VRF systems, server rooms and residential property managers. Pick the one closest to your job and you start with the right sections, the right visit pattern and the right questions already in place.

There is no signup. Describe the site and the equipment in a few lines, enter your own prices, and the AI writes the scope, visit schedule and terms around your numbers. Edit any text inline, add your logo, choose your currency, and download a print-ready PDF with no watermark. You get 3 free AI generations per day, or you can start from a blank draft.

Free, no signup AI writes the draft, you set the prices Edit inline, download a PDF

Choose a template

Prices shown in the previews are examples only: you enter your own figures, and the currency and tax rate are editable in every template.

  • Office Split System Maintenance Proposal

    A clean maintenance template for HVAC contractors quoting twice-yearly service on ductless split and mini-split systems in small offices.

  • Rooftop Unit Maintenance Proposal

    A rugged proposal template for HVAC contractors pricing planned maintenance on packaged rooftop units across one or several retail stores.

  • Restaurant HVAC and Kitchen Ventilation Proposal

    A warm, practical template for contractors quoting kitchen extract, make-up air, canopy and grease care alongside dining room HVAC for restaurants.

  • Hotel HVAC Maintenance Proposal

    A refined template for HVAC contractors proposing chiller, AHU and guest room fan coil maintenance to hotels, scheduled around occupancy.

  • School HVAC Servicing Proposal

    A structured template for contractors quoting heating, ventilation and cooling servicing for schools, with major work planned around the school holidays.

  • Clinic HVAC Maintenance Proposal

    A formal template for HVAC contractors proposing maintenance for clinics and medical centres, covering filtration, room pressures, temperatures and records.

  • Warehouse Heating and Ventilation Maintenance Proposal

    A heating season template for warehouse operators who need radiant heaters, warm air units, destratification fans and roof extract kept running.

  • Multi-Site HVAC Maintenance Proposal

    A portfolio template for HVAC contractors quoting one maintenance schedule, per-site pricing and consolidated reporting across many buildings.

  • Commercial Boiler Maintenance Proposal

    A boiler room template for heating engineers quoting the annual service, combustion analysis, safety checks and heating season readiness of commercial boilers.

  • VRF and VRV System Maintenance Proposal

    A technical template for air conditioning contractors maintaining VRF or VRV systems: outdoor condensers, indoor units, controls, leak checks and error logs.

  • Server Room Cooling Support Proposal

    A response-time template for cooling contractors supporting server rooms and small data rooms with precision or split units, monitoring and SLA tiers.

  • Property Manager HVAC Maintenance Plan Proposal

    A rental portfolio template for heat pump and HVAC firms offering property managers a per-home annual tune-up plan with tenant booking handled for them.

What each template covers

Each design comes with its own sections, sample scope, visit schedule, pricing layout and exclusions. Pick the one closest to the job, then describe the site in the brief.

01

Office Split System Maintenance Proposal

HVAC contractors and service technicians quoting a planned maintenance agreement for a small office, practice or studio that runs on wall, ceiling cassette or ducted split systems.

It opens with a short summary and the comfort problems the office has today, then lists the tasks done at every visit and the equipment covered unit by unit. A two-visit schedule, a per-unit price statement and plain exclusions close the proposal.

Typical scope
  • Clean or replace indoor unit air filters and wash the evaporator coil
  • Clean outdoor condenser coils and clear debris around the unit
  • Flush condensate drains, test pumps and check for leaks at the ceiling
  • Measure refrigerant pressures, temperature split and compressor amps
  • Check electrical connections, disconnects and wall controller operation
  • Record each unit's condition in a written service report
Visit schedule
Two visits a year, one before the cooling season and one before the heating season.
Pricing model
Usually priced per split system per visit, billed as an annual agreement, with repairs and refrigerant quoted separately at agreed labor rates.

02

Rooftop Unit Maintenance Proposal

Commercial HVAC contractors quoting planned preventive maintenance on packaged rooftop units for a retailer, a small store chain or a retail park landlord.

It starts with the condition of the roof plant and the trading risks it creates, lists the rooftop units covered at each store, then sets out the quarterly maintenance routine. A quarterly visit calendar, per-unit pricing and terms on roof access and parts complete it.

Typical scope
  • Replace pleated filters and check filter frames for bypass
  • Inspect and tension or replace fan belts, check pulleys and bearings
  • Clean condenser coils and inspect the evaporator coil and drain pan
  • Test economiser dampers, actuators and minimum fresh air settings
  • Check gas heat sections, flue and burner operation where fitted
  • Leak check refrigerant circuits and update the equipment log
Visit schedule
Four visits a year, with full coil cleaning in spring and heating checks in autumn.
Pricing model
Usually priced per rooftop unit per visit, grouped by store, with filters and belts either included as a consumables allowance or charged at cost.

03

Restaurant HVAC and Kitchen Ventilation Proposal

HVAC and ventilation contractors quoting a service plan for a restaurant, café or commercial kitchen where the extract canopy, make-up air and dining room cooling all need regular care.

It explains how the kitchen and dining room air systems affect service, fire risk and comfort, then walks through the work as a sequence from canopy filters to roof fan. A step-by-step service calendar, the equipment and records included, and a monthly plan estimate follow.

Typical scope
  • Swap and degrease canopy baffle filters on a set cycle
  • Clean grease ducts and access panels and record before and after condition
  • Inspect and clean the extract fan, belts, bearings and grease drain
  • Service the make-up air unit: filters, fan, heating or cooling section
  • Maintain dining room split or packaged units and condensate drains
  • Check kitchen and dining room air balance so doors do not slam or pull
Visit schedule
Monthly visits for filters and fans, with deeper grease duct cleaning every quarter and seasonal checks on dining room cooling.
Pricing model
Often priced as a monthly service plan for the kitchen and dining systems, with quarterly duct cleaning and any initial deep clean listed as separate lines.

04

Hotel HVAC Maintenance Proposal

Mechanical maintenance contractors bidding for a hotel's comprehensive or semi-comprehensive HVAC contract, from a 60-room boutique property to a full-service city hotel.

It frames the work around guest comfort and quiet operation, separates central plant from guest floor work, and shows the equipment and reports included. A visit rail, the engineers assigned to the property and pricing split into plant and guest room panels complete it.

Typical scope
  • Chiller performance logging, condenser and evaporator checks, oil and vibration review
  • Cooling tower cleaning and water treatment coordination
  • AHU filter changes, coil cleaning, belt and bearing checks
  • Guest room fan coil filter cleaning, drain pan treatment and noise checks
  • Kitchen and toilet exhaust fans, fresh air units and BMS alarm review
  • Room-by-room servicing booked against housekeeping vacancy
Visit schedule
Monthly central plant visits, with guest room fan coils serviced floor by floor so every room is covered each quarter.
Pricing model
Typically an annual contract billed monthly for the central plant, with guest room fan coils priced per unit per quarter and repairs or parts beyond the contract quoted separately.

05

School HVAC Servicing Proposal

Heating and ventilation contractors quoting an annual servicing contract to a primary or secondary school, a board of management or an education trust.

It leads with the school calendar, showing which work happens in each holiday break before setting out the tasks on boilers, classroom ventilation and cooling. The equipment list, a per-visit price ledger and terms on site safety and term-time access follow.

Typical scope
  • Annual boiler service, flue gas analysis and safety checks before the heating season
  • Heating pumps, pressurisation unit and expansion vessel checks
  • Classroom ventilation unit filters, fans and CO2 sensor checks
  • Sports hall or assembly hall air handling unit service
  • IT room and office split units: filters, coils, drains and leak checks
  • Heating controls and time schedules set to the school calendar
Visit schedule
Main servicing during the summer holidays, with checks at the October, Christmas and Easter breaks and term-time callouts only for faults.
Pricing model
Usually an annual servicing contract priced per visit or per item of plant, with holiday works listed separately and term-time repairs charged at an agreed rate.

06

Clinic HVAC Maintenance Proposal

HVAC contractors quoting a maintenance agreement for a GP practice, day clinic, dental surgery or small medical centre where air quality, room pressures and stable temperatures matter for patients and medicines.

It sets out the clinical risks first, from infection control to medicine storage, then details the maintenance tasks, the equipment and the records kept for inspections. A visit ledger, the named technicians and a monthly agreement price follow, with terms on response times and access to clinical rooms.

Typical scope
  • Replace pre-filters and fine filters to the specified grades and log pressure drop
  • Measure and record pressure differentials in procedure and isolation rooms
  • Check temperature and humidity in the medicine store and dispensary
  • Clean coils, drain pans and condensate lines with a clinical-grade disinfectant
  • Test extract fans for isolation rooms, sluice rooms and toilets
  • Restart and check all plant after power interruptions
Visit schedule
Monthly visits for filtration, pressures and temperatures, with a full service on all units every six months.
Pricing model
Commonly a monthly maintenance agreement for a fixed list of rooms and units, with a priority response tier included and parts or refrigerant quoted separately.

07

Warehouse Heating and Ventilation Maintenance Proposal

Heating and ventilation contractors servicing distribution centres, logistics halls and light industrial units where the space is tall, the doors open all day and the heaters only matter once the cold arrives.

A pre-season service of every gas-fired heater, a mid-winter check and an end-of-season shutdown, written around the heating calendar. It opens with the cost of an unheated loading dock, lists each appliance group with its service checks, and closes with an itemised per-appliance estimate.

Typical scope
  • Gas-fired radiant tube heaters: burner, igniter, tube and reflector inspection
  • Warm air unit heaters at dock doors: heat exchanger, fan and flue checks
  • Destratification fans: mounting, blade balance and controller settings
  • Roof extract fans and louvres: belts, bearings, dampers and bird mesh
  • Gas tightness test on the heater supply pipework and isolation valves
  • Zone thermostats, frost protection and time clock programming
Visit schedule
A pre-season service in September, a short mid-winter check in January and a shutdown visit in April.
Pricing model
Usually quoted as a fixed annual contract built from a per-appliance service rate, with the mid-winter check as a single visit price and repairs quoted separately.

08

Multi-Site HVAC Maintenance Proposal

Mechanical service contractors bidding for a landlord, retailer or office group with several buildings in one region or country, where the client wants one contract, one point of contact and comparable reports for every site.

It opens with a table of contents and an executive summary of the portfolio, then sets out the common service standard applied at every building, the onboarding survey, a seasonal visit ledger and per-site pricing grouped by building size. A team page can introduce the account manager and the technicians who own each area.

Typical scope
  • Onboarding survey and asset tagging at every site
  • Seasonal start-up and changeover visits for rooftop units and furnaces
  • Filter changes, belt checks and coil cleaning to one common checklist
  • Make-up air units, unit heaters and exhaust fans on each roof
  • Quarterly portfolio report comparing sites, defects and spend
Visit schedule
Four seasonal visits per site each year, with the heating changeover in autumn and the cooling start-up in spring.
Pricing model
Usually priced per site per quarter, banded by building size or equipment count, plus a one-time onboarding fee per site and a portfolio management line.

09

Commercial Boiler Maintenance Proposal

Heating engineers and building services firms maintaining gas or oil boiler plant in offices, care homes, schools, apartment blocks and other commercial buildings that cannot go without heat or hot water.

A boiler room proposal written around the plant itself: the condition found on the survey, the annual service and combustion analysis for each boiler, the safety devices tested, and a readiness check before the heating season. It lists the plant covered with its outputs and closes with a ledger of the annual price and the standby rates.

Typical scope
  • Annual boiler service: burner, heat exchanger, ignition and flame supervision
  • Combustion analysis with flue gas readings recorded per boiler
  • Safety device tests: limit thermostats, pressure switches, gas valves
  • Pressurisation unit, expansion vessels and safety valves
  • Heating and hot water pumps, mixing valves and weather compensation
  • Water treatment check and condensate neutraliser refill
Visit schedule
A full annual service before the heating season, a readiness check at first firing and an inspection in midwinter.
Pricing model
Usually a fixed annual service price per boiler plus a price for the ancillary plant, with standby or emergency callout rates listed separately.

10

VRF and VRV System Maintenance Proposal

Air conditioning contractors who service variable refrigerant flow systems in offices, medical suites, apartment buildings and hotels, where one refrigerant circuit feeds dozens of indoor units and a single fault can take out a whole floor.

It is written system by system: each outdoor unit and its indoor units, the central controller, the error history pulled on every visit and the refrigerant leak checks. Pricing is per outdoor unit and per indoor unit per quarter, and a team page can introduce the technicians who know the system.

Typical scope
  • Outdoor condensing units: coils, fans, compressors, electrical and operating data
  • Indoor units: filters, coils, drain pans, condensate pumps and louvres
  • Branch selector or BC boxes and refrigerant piping insulation
  • Refrigerant leak checks and pressure and temperature readings
  • Central controller: error log download, schedules and backup of settings
  • Service checker or diagnostic tool readout compared with the last visit
Visit schedule
Quarterly visits, with the full coil clean and diagnostic readout on the visit before the peak cooling season.
Pricing model
Usually priced per outdoor unit and per indoor unit per visit or per quarter, with the annual leak check and controller backup as separate yearly lines.

11

Server Room Cooling Support Proposal

Precision cooling and air conditioning contractors supporting server rooms, comms rooms and small data rooms for offices, banks, hospitals and software firms, where the client cares most about how fast someone arrives when temperature climbs.

It starts from the risk: what a cooling failure does to the racks and how quickly the room heats up. It then sets out the units and sensors covered, the monthly preventive tasks, and response tiers with committed attendance times, priced as a support retainer.

Typical scope
  • Precision air conditioning units: compressors, fans, filters, humidifiers
  • Backup split units and automatic changeover on unit failure
  • Temperature and humidity sensors with alert escalation
  • Monthly preventive visits with recorded supply and return temperatures
  • Emergency response tiers with committed attendance times
  • Quarterly duty rotation and failover test between units
Visit schedule
A monthly preventive visit, a quarterly failover test, and emergency attendance at any hour within the agreed response tier.
Pricing model
Usually a monthly or annual support retainer per cooling unit, with the response tier as a priced option and parts either included (comprehensive) or charged (non-comprehensive).

12

Property Manager HVAC Maintenance Plan Proposal

Heat pump, furnace and air conditioning service firms working with residential property managers, letting agents and build-to-rent owners who look after dozens or hundreds of homes and need tenants booked, units serviced and reports filed without chasing.

A plan rather than a site contract: who it is for, what every home gets on its annual tune-up, how tenants are contacted and booked, and what the property manager receives after each visit. Pricing is per home with add-ons for extra units, followed by the yearly calendar of rounds.

Typical scope
  • Annual tune-up of each home's heat pump, furnace or air conditioner
  • Filter clean or replacement and outdoor unit coil wash
  • Kitchen and bathroom extractor fan checks
  • Tenant contact, booking and access arranged by our office
  • Per-home visit report with photos sent to the property manager
  • Priority callouts for enrolled homes during the heating season
Visit schedule
One tune-up per home each year, done in rounds before the heating season, with callouts as needed in between.
Pricing model
Usually a fixed price per home per year, with add-on prices for extra units in the same home and a fee for missed tenant appointments.

How to write an HVAC maintenance proposal

A good HVAC maintenance proposal tells the client exactly which equipment you will look after, what happens on each visit, how often you come, what it costs, and what is not covered. Get those five things clear and most of the questions that slow down a signature disappear. The sections below walk through each part, with notes on how the templates on this page handle it.

What to include in an HVAC maintenance proposal

Clients compare maintenance proposals side by side, often against a competitor who quoted a lower number for less work. The way to win that comparison is to make your scope impossible to misread. Every strong HVAC maintenance proposal covers the same core parts, whatever the size of the site.

  • Site survey summary: what you found on your walk-round, the condition of the plant, access notes, and anything that needs attention before planned maintenance starts.
  • Equipment schedule or asset list: every unit covered, with its location, type, make and model where known, and capacity. If a unit is not on the list, it is not in the contract.
  • Task list per visit: filter changes, coil cleaning, belt and drive checks, condensate drain clearing, electrical connection checks, refrigerant pressure readings, controls and thermostat checks, and anything specific to the equipment type.
  • Visit frequency: how many planned visits per year, which months they fall in, and whether some visits are lighter inspections and others are full services.
  • Reporting: what the client receives after each visit, such as a service report, readings, photos, and a list of recommended repairs with a separate quote.
  • Response times: how quickly you attend a breakdown during and outside business hours, and whether callouts are included or charged separately.
  • Exclusions: what is not covered, written plainly so there is no argument later.
  • Term and renewal: the start date, the contract length, how it renews, and the notice period to cancel.
  • Acceptance: a clear place for the client to sign, with the name, title and date.

How to price an HVAC maintenance contract

Start from your own costs: labor time per visit including travel, consumables such as filters and cleaning chemicals, the number of visits, and an allowance for the paperwork and reporting. Then choose the pricing structure that matches how the client thinks about the work. The three common structures are compared below.

Common pricing structures for HVAC maintenance
StructureHow it worksBest forWatch out for
Per visitA fixed price for each planned visit, invoiced after the work is done.Small sites, first-time clients, or a trial year before a longer agreement.Clients may skip or delay visits to save money, which makes the equipment harder to keep in good condition.
Annual contractOne agreed price for the year covering all planned visits, often billed monthly or quarterly.Offices, retail, hotels, schools and clinics that want a predictable budget line.Spell out the number of visits and what each one includes, or the annual price looks arbitrary.
Per unit or per assetA price for each piece of equipment, so the total scales with the asset list.Sites with many similar units, such as rooftop units, split systems or homes on a residential plan.Keep the asset list current: units added or removed during the term should change the price.
  • Per-site pricing for portfolios: when one client has several sites, price each site as its own line so the client can see what each location costs and add or drop sites later without renegotiating the whole contract.
  • Response-tier pricing for critical cooling: for server rooms, clinics and other sites where downtime is expensive, define two or three response levels with different attendance times, agree which one the client needs, and price that level. If the client wants to compare levels side by side, send one proposal per level so each total stays accurate.
  • Billing frequency: in the generator, each line item can be one-time, monthly, quarterly or yearly, so an annual contract billed quarterly and a one-off remedial job can sit in the same proposal.

Common exclusions in HVAC maintenance contracts

Exclusions protect your margin and set honest expectations. List them in the proposal itself, not only in separate terms, so the client reads them before signing. Typical exclusions include:

  • Parts and materials above an agreed value per repair, which are quoted separately for approval.
  • Refrigerant top-ups and recharges, unless a quantity is included in the price.
  • Major repairs and equipment replacement, such as compressors, heat exchangers or complete units.
  • Ductwork cleaning, unless it is listed in the task schedule.
  • Out-of-hours, weekend and public holiday callouts, unless a response tier covers them.
  • Access equipment such as scissor lifts, scaffolding, cranes or roof access systems.
  • Damage caused by misuse, tampering, power surges, flooding or work by other contractors.
  • Equipment past its end of life or no longer supported by the manufacturer, where parts may not be available.
  • Building management system programming, water treatment and fire damper testing, unless agreed separately.

Writing the scope and visit schedule

Tie each visit to a month and a purpose. A cooling service before the warm season and a heating service before the cold season show the client you are planning around their building, not just turning up. In climates without a strong winter, split the year by peak cooling load instead.

Then plan around how the building is used. Schools are best serviced during holidays when classrooms are empty. Hotels have low-occupancy weeks when rooms and plant can be taken offline. Restaurants need kitchen extract and ventilation work outside service hours. Offices may prefer early mornings or weekends. Write the agreed working hours into the schedule so nobody is surprised.

Keep record-keeping in the scope too. Many countries have their own rules for refrigerant handling, leak checks and record keeping, such as F-gas records in some regions. The rules vary by country, so state which checks and records you will keep under the regulations that apply to the site.

Making the proposal easy to accept

The last page decides whether the proposal turns into a contract this week or sits in an inbox. Remove every reason to pause.

  • A clear term: the start date and the length, for example twelve months from the first visit.
  • Renewal terms: whether the contract renews automatically, how any price review works, and the notice period to cancel.
  • Payment terms: billing frequency, when each invoice is due, and how the client can pay.
  • One total per billing period, so the client can see the commitment at a glance.
  • A signature block with the client's name, title and date, and a line telling them what happens next, such as booking the first visit.

How to use these templates with the generator

Each template already follows the structure above, so most of your time goes into the details only you know: the site, the equipment and your prices.

  • Pick the template closest to the job, for example the school or server-room template.
  • Describe the site, the equipment and the visit pattern in a few lines.
  • Enter your line items and prices, and set each one as one-time, monthly, quarterly or yearly.
  • Generate with AI, or start from a blank draft if you prefer to write it yourself.
  • Click any text to edit it, add your logo, set the currency and tax rate, and show or hide sections.
  • Download the PDF and send it to the client.

Frequently asked questions

What should an HVAC maintenance proposal include?

It should include a site survey summary, an equipment schedule listing every unit covered, the tasks done on each visit, the visit frequency, what you report after each visit, response times for breakdowns, clear exclusions, the term and renewal, and an acceptance section. Every template on this page has those sections built in.

How do I price an HVAC maintenance contract?

Work out your labor time per visit including travel, your consumables, the number of visits per year, and an allowance for reporting. Then choose a structure: per visit, an annual contract billed monthly or quarterly, or a price per unit. For portfolios price each site separately, and for critical cooling offer response tiers.

Should I charge per visit or as an annual contract?

Per visit suits small sites and first-time clients who want to try you out. An annual contract gives the client a predictable budget and gives you committed work for the year, which is why most commercial clients prefer it. If you want the client to compare the two, send a separate proposal for each option so each total stays accurate.

How many maintenance visits a year should a contract include?

It depends on the equipment, how hard it runs and the manufacturer's guidance. Light commercial split systems are often serviced twice a year, while kitchens, server rooms and heavily used rooftop units usually need more frequent visits. State the number of visits and the months they fall in so the client knows exactly what they are buying.

Should refrigerant be included in the maintenance price?

Usually not. Most contracts exclude refrigerant top-ups and recharges, or include a fixed quantity and charge for anything above it. Say which approach you use in the exclusions, and note that refrigerant handling and record rules vary by country.

What is the difference between a maintenance agreement and a service contract proposal?

The proposal is the sales document: it explains the scope, the schedule and the price so the client can decide. Once the client signs, the agreed scope becomes the maintenance agreement or service contract you deliver against. Writing the proposal with the same structure as the agreement makes that step simple.

Does the AI set the prices?

No. You enter every price, quantity and tax rate yourself. The AI only writes the words around your numbers, so the totals in the PDF are exactly what you typed.

Can I change the currency?

Yes. Choose from common currencies, set your own tax rate, and the totals are calculated from the line items you enter. The prices you see in the template previews are examples only.

Can I use my own logo and wording?

Yes. Upload a PNG, JPG or WebP logo up to 300 KB and it is embedded in the PDF. Every section is editable inline, and you can show or hide sections to fit the size of the job.

Are these templates free, and do I need to sign up?

Yes, they are free and there is no signup, no email and no watermark. Your draft is saved in your browser, and when you use AI generation your brief is sent to our server so the AI can write the text, and you get 3 free AI generations per day or can start from a blank draft at any time.

More templates by industry